Dual-antenna CPT7 enclosure with GNSS+INS technology
GET QUOTEDescription
Description
The CPT7 is a single enclosure Global Navigation Satellite System (GNSS) + Inertial Navigation System (INS) receiver powered by OEM7 technology from Hexagon | NovAtel that delivers up to centimetre-level accuracy. The dual-antenna inputs provide the user with heading information and rapid alignment of the combined GNSS+Inertial solution. It’s lightweight, ultra-compact and offers a low-power solution with multiple communication interfaces for easy integration on multiple platforms.
The CPT7 contains a high-performing Honeywell HG4930 Micro Electro Mechanical System (MEMS) Inertial Measurement Unit (IMU) to deliver NovAtel’s world-class SPAN technology in an integrated solution. SPAN technology deeply couples GNSS positioning and the stability of IMU gyro and accelerometer measurements to enhance satellite tracking and provide the most continuous positioning solution possible.
Features
Features
- MEMS gyro and accelerometers
- SPAN GNSS+INS capability with configurable application profiles
- Advanced interference mitigation features
- Dual antenna ALIGN heading
- Wheel sensor (DMI)
- Purchasable upgrade for high IMU data rate (up to 400 Hz)
- Internal data logging and transfer (16 GB)
- Four receiver status LEDs
- Event in and event out to support 1 PPS
- Multiple communication interfaces
- Commercially exportable system (non-ITAR)
Attributes
Attributes
| System Type | Enclosed with IMU | |
| GNSS+INS enabled | ||
| General Info | Length (mm) | 90 |
| Width/Diametre (mm) | 60 | |
| Height (mm) | 60 | |
| Weight (g) | 500 | |
| Typical Power Consumption (W) | 9 | |
| Signal Tracking | GPS | L1C/A, L1C, L2C, L2P, L5 |
| GLONASS | L1C/A, L2C/A, L2P L3, L5 | |
| BeiDou | B1l, B1C, B2l, B2a, B2b | |
| Galileo | E1, E5 AltBOC, E5a, E5b | |
| NavIC (IRNSS) | L5 | |
| SBAS | L1, L5 | |
| QZSS | L1 C/A, L1C, L2C, L5 | |
| L-Band (primary RF only) | Up to 5 channels | |
| Number of Com Ports | RS-422 | 1 |
| RS-232 | 1 | |
| Ethernet | 1 | |
| RS-232 (230 400 bps max) | 1 | |
| USB Device | 1 | |
| CAN Bus | 1 | |
| Event Input | 3 | |
| Event Output | 3 | |
| Wheel Sensor Input | 1 | |
| Performance | Accuracy | (RMS) |
| Single Point L1 | 1.5 m | |
| Single Point L1/L2 | 1.2 m | |
| SBAS | 60 cm | |
| DGPS | 40 cm | |
| TerraStar-L | 40 cm | |
| TerraStar-C PRO | 2.5 cm | |
| TerraStar-X | 2.0 cm | |
| RTK | 1 cm + 1 ppm | |
| IMU Raw Data Rate | 100 Hz or 400 Hz | |
| Gyroscope Performance | Technology | MEMS |
| Input Rate (max) | ±325°/S | |
| Accelerometer Performance | Technology | MEMS |
| Range | ±20 g |
